Re: Will a C113 head work on a C123?

Posted by El Toro on March 29, 2005 at 07:55:12 from (152.163.101.13):

In Reply to: Will a C113 head work on a C123? posted by MM_TX on March 29, 2005 at 05:42:36:

My IH manual is a little unclear if these tractors
had rotocaps when they were built. The manual says the rotocaps are available for factory and field installation. They would fit the Super A and the Super AV too. The manual also states that the Farmall H and H series tractors had factory installed rotocaps and the M too after SN
FBKM 281977. I'm not sure if the rocker arms and push rods are interchangeable between the C and Super C. The geometry may be different. A machine shop can probably rework the head from
from the Super C. They can install new valve guides, valve seats if needed and any valves that may be too thin. I would install new springs too. They can also milled the head if needed.
Hal

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]