Re: t.a. stuck on low side

Posted by DWV on April 02, 2005 at 18:42:08 from (152.163.101.13):

In Reply to: t.a. stuck on low side posted by catfish on April 02, 2005 at 17:15:26:

From the T/A lever follow linkage rod to the shaft that goes into T/A housing.Remove the pins
from both linkage at this shaft.Shaft should turn
freely by hand in one dirrection and you should
be able to feel it contact T/A presser plate fingers in other dirrection.If the shaft is free
and T/A doesnt work in high with linkage disconnected you have T/A clutch problem.You can remove cover on top of housing and look.If it needs replaced tractor will have to be split at front of housing.

Follow Ups:

• Re: t.a. stuck on low side catfish 06:15:50 04/03/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]