Farmall & IHC Tractors Discussion Board |
Re: B275 Steering Q's
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Derek Broerse on April 24, 2005 at 09:43:37 from (206.186.115.242):
In Reply to: Re: B275 Steering Q's posted by Michael Soldan on April 23, 2005 at 17:50:30:
Hi Mike, I think your thinking matches my own--the word I was missing from my description is 'binding'! It feels like it is stuck but I can force it past... thats why I figured it wasn't just normal heavy steering. I have not actually measured the alignment yet (and with all the rain and sitting in the field I don't want to bring it up the fresh gravel! My old man would kill me!) nor have I confirmed tire sizes--I did notice that one was a Goodyear and the other was another brand, but both were fairly new looking. For the loader work I should probably inflate the fronts harder anyways. To me, it seems between the loose axle and loose steering box that there is a lot of free travel in the steering which may be putting the balljoints under extreme travel and stresses under the right circumstances... and this may be indeed where the binding is coming from. I pulled all the front zerks out that weren't taking grease and cleaned them out. They are all ok now, but the spindles themselves seemed weird. While the zerks were out I used a scratch awl to poke around in the hole where they had been--there did not appear to be any sort of hole of groove for the grease to travel in. The grease fitting basically opens into a blank piece of steel. Could the spindles be mixed left to right or something? There should be a groove but even moving the steering from lock to lock I cannot locate one thru the holes.
I ended up ordering a manual thru this website--they list a 300+ page book in 12 sections--sounds an awful lot like the binder I was bidding on on ebay. Maybe its a reproduction of it? Their descriptions are quite vague. Including shipping it was still cheaper than what I bid on ebay (it came to $59 here). I have my fingers crossed that it is a useful book. Good news, though. I have seen a red tractor hood-high in the weeds about 3 blocks from my house for many many years without moving. Recently, it was dragged by another tractor (on flat tires) closer to the road so they could put in a new vineyard. Sure enough, now that I can get a little closer to it (and see the side profile instead of the rear) it is indeed a B275 diesel. I am in the process of trying to find out who actually owns the farm. I'm still about 35 feet away but can still read the faded decals... it appears to have been joined by a Ford 600--probably the tractor that pulled it there. Wish me luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
Memories of a Farmall C - by Monty Bradley. When I was a child, my grandparents lived on a farm owned by a Mr. Walters. The crops raised were cotton and soybeans, with about forty head of mixed breed cattle. Mr. Walters owned two tractors then. A Farmall 300 on gasoline and a Farmall C, that had once belonged to his father-in-law, and had been converted from gasoline to LP Gas. Many times, as a small boy, I would cross the fence behind the house my grandparents lived in and walk down the turn row to where granddaddy would be cultivati
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|