Re: PTO seal on C

Posted by Bill Griffin on April 29, 2005 at 04:19:01 from (128.143.97.26):

In Reply to: Re: PTO seal on C posted by BIG JOHN on April 28, 2005 at 19:18:56:

What came out the back first was a sandwich of 2 thin metal washers with a piece of flat leather in between, then the lip seal was in behind that. The reason I thought I was wrong is that the edge of the cast iron housing is rolled over somewhat making the actual hole that I pulled the pieces through smaller than the inside diameter. I couldn't see any way to drive the new seal in through that smaller ID hole. To get the old ones out, I drilled a hole and then screwed a sheet metal screw in and caught the head of that with a pry bar.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]