Re: PTO seal on C

Posted by Haas on April 29, 2005 at 16:20:44 from (12.65.6.3):

In Reply to: PTO seal on C posted by Bill Griffin on April 28, 2005 at 18:22:19:

I assume you are talking about the gear on the PTO shaft on the inside of the housing. You have to use a puller to get it off. Should not be too hard to get off. You can't drive the shaft out, because there is a woodruff (half moon) key in the shaft. That key will hit against the housing when you try to drive the shaft out, preventing removal of the shaft. However, you may try a few raps on the end of the shaft to break the gear loose from the shaft. Then you should be able to pull it off fairly easily. As others said, the old seal can come out from the outside. However, really hard to get it out since it is so thick.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]