Re: Farmall C Pistons Stuck Rods Stuck, too

Posted by El Toro on April 30, 2005 at 11:22:41 from (152.163.101.13):

In Reply to: Farmall C Pistons Stuck Rods Stuck, too posted by PurdueAg on April 29, 2005 at 20:27:53:

You need to drive from the bottom. Those wet sleeves will come out with the piston if they're stuck tight. I had the same thing with a Farmall
A that has the same engine. If that happens you can heat them with a torch to get trhe pistons out. You are probably going to need a new sleeve and piston kit anyway.

Where are you located? I would tell you to load up that engine and I would help you take it apart.
Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]