Re: 806G TA problems??

Posted by the tractor vet on May 03, 2005 at 20:36:37 from (4.124.78.99):

In Reply to: 806G TA problems?? posted by ol;'George on May 03, 2005 at 15:18:37:

First thing to check is that the spool valve is going all the way down to the snap ring and then all the way up . Next is to check the clutch pressure regulator spring and make a pressure test and see what you have for lock up pressure i like them at a round 265 to 285 . And if this all checks out ok then it is time for the big one . Stock lock up pressure will be down around 210 to 220 just off the top on my head, and that would be ok but i like it up a bit that way i know that they won't slip up to over 250 hp. Also check the spool for any binding it should float free in the bore. And be careful when removing it as it has spring pressure behind the plug.

Follow Ups:

• Re: 806G TA problems?? ol'George 05:03:54 05/04/05 (2)
  • Re: 806G TA problems?? the tractor vet 17:58:11 05/04/05 (1)
    • Re: 806G TA problems?? ol'George 04:55:27 05/05/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]