Re: Cub (Ridge reamer wont fit)

Posted by El Toro on May 14, 2005 at 09:01:15 from (205.188.117.138):

In Reply to: Cub (Ridge reamer wont fit) posted by GNB on May 14, 2005 at 06:41:47:

I think the pistons can be removed from the bottom of the block after you remove the crankshaft. Give it a try anyway and if there's a problem, the machine shop can remove the ridge and then remove the pistons. If it is worn beyond the specs the block may need to be bored oversize. Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]