Re: farmall 100 throttle problem.

Posted by Hugh MacKay on June 06, 2005 at 02:57:58 from (216.208.58.150):

In Reply to: farmall 100 throttle problem. posted by u utt on June 06, 2005 at 02:32:57:

Your problem is within the governor, probably spring or thrust bearing. Not a lot of fun removing as rad and shroud are very close. Most folks remove the rad, however the governor can be removed without. If you must remove rad, fastest removal is unbolt entire front end at front of engine, remove steering wheel from shaft, disconnect lights and rad hoses. Place a bottle jack under clutch housing and roll entire front end away. If you have no seized bolts, about 1/2 hour job to remove front end.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]