Farmall & IHC Tractors Discussion Board |
Re: hydraulic cyclinders for farmalls
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Nat on June 10, 2005 at 20:14:03 from (24.93.8.168):
In Reply to: hydraulic cyclinders for farmalls posted by Kevin Brooks on June 10, 2005 at 19:14:54:
The easiest place to find something like a complete PTO assembly for an M would be at a tractor salvage yard. Just tell the guy what you have and ask for what you need. While they did sell hydraulic cylinders as optional equipment for Farmall tractors, they were actually installed on the towed equipment, like plows, planters, mower-conditioners, and other implements where a hydraulic lift was necessary. Back then, farmers were relatively poor and/or thrifty compared to now, and would have one cylinder for all their equipment. Nowadays, equipment generally comes with its own hydraulic cylinders, or uses generic hydraulic cylinders available at farm supply stores and machinery dealers. The only reason you'd want a "genuine Farmall" cylinder is for historical accuracy on a show tractor. Otherwise, a generic cylinder of the proper size is just fine. Research the equipment that needs the hydraulic cylinder first, so you know what size cylinder it needs. A 3"x8" cylinder might not be the right size, then you bought it for nothing. A 2pt or 3pt hitch was NEVER a factory option on an M. Everything was either bolted-on or hooked to the drawbar. There are aftermarket 3pt hitches, but they are expensive, and limited in what they can do because the tractor was never designed to have a 3pt hitch on it. You can't use one to plow, for example.
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|