Ream to Size?

Posted by Pharmall on June 14, 2005 at 20:39:16 from (68.9.106.167):

In Reply to: Re: Bushing Source for $1.98 Each! posted by BobOH on June 14, 2005 at 19:42:40:

Wondering if they will still need to be reamed to size... The I&T
manual calls for a .002" - .004" clearance. Since these bushings
are .877"-.879" OD, the ID may shrink a bit when they are
pressed into the rocker arms. Best to check with some
platigauge. Let us know how it works out! Jeff

Follow Ups:

• Re: Ream to Size? BobOH 20:43:22 06/14/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]