Re: H carb rebuild

Posted by riverbend on June 15, 2005 at 20:25:58 from (208.160.33.163):

In Reply to: H carb rebuild posted by bhb on June 15, 2005 at 18:24:03:

Drilling is not required to rebuild the carb on your H. The IT manual has an adequate drawing of the carb (D10?) that shows the location of the jets. If the parts that you have don't match up with either carb, you might have the wrong parts.

The idle air jet, the one nearest the idle air adjuster screw is threaded. 1/8" sounds too small.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]