Re: Farmall M

Posted by williamf on June 30, 2005 at 05:38:35 from (66.82.9.87):

In Reply to: Farmall M posted by Nositri on June 29, 2005 at 11:57:21:

You can check to see if it's a worn spot on the flywheel by turning the engine a quarter turn or so by hand and seeing then does it engage. I've been starting my H this way for a long time. (Just until I get around to splitting it, doncha know.)
Before I got a hand crank I learned the easy way to turn it a little is to engage the pto and turn the pto shaft with a pipe wrench. Wouldn't want to do that often, don't want to chew up the splines, but once or twice as part of troubleshooting...
Good Luck, Wm

Follow Ups:

• P.S. williamf 05:41:55 06/30/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]