Re: 2N overheats

Posted by Jeb2N on July 06, 2005 at 09:29:03 from (65.40.234.137):

In Reply to: 2N overheats posted by Scott Lathrop on July 06, 2005 at 06:21:33:

You may want to post this on the Ford N-series board, but usually, it would be something like:

1) radiator over full. Only add enough fluid to just cover the top of the coils. The rest of the tank is basically a reservoir for expansion. Too much water = boil over every time.

2) Thermostat in backwards. If installed, the pointed end points towards the radiator and goes in the upper hose.

3) Trash in cooling fins. Take an air hose and blow the trash out from the engine side.

Hope this helps.

Jeb

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]