560 and full hydraulic/hydrostatic steering?

Posted by Chris Brown on July 17, 2005 at 07:55:34 from (209.206.208.45):

Has anyone here put hydraulic steering like on the bigger tractors on a 560?Does the 560's hyd pump have enough flow to run the steering? The manual says the 560 makes 2.3-2.7gpm at 1200-1500 psi,the pressure sounds ok but the flow is a little slow sounding. I have never been happy with the power steering on my tractor with a loader on it and this morning I was out stacking bales and something popped in the front end,now the wheels are locked about half way to the right and the steering wheel turns freely about one and a half turns and locks. I have a hydrostat control and the steering cylinder and all the nicknacs to put hyd. steering on there,but would like to hear others opinions first. Especially on the flow of the 560's p/s pump. thanks..

Follow Ups:

• Re: 560 and full hydraulic/hydrostatic steering? Aces 04:47:41 07/18/05 (0)
• Re: 560 and full hydraulic/hydrostatic steering? Aces 08:39:19 07/17/05 (1)
  • Re: 560 and full hydraulic/hydrostatic steering? Chris Brown 09:54:23 07/17/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]