Re: Carb for H, Sh,W4

Posted by RustyFarmall on August 20, 2005 at 06:50:34 from (199.120.81.207):

In Reply to: Carb for H, Sh,W4 posted by GordoSD on August 20, 2005 at 06:01:39:

Gordo, that fitting is available in a kit from your Case-IH dealer, but that particular kit will cost right at $100. You can probably purchase the fitting seperately. Any rebuild kit should have the gasket in it. Your other option is to visit a hardware store and buy some very fine mesh brass or stainless screen and make your own. The screen is soldered into the fitting.

Follow Ups:

• Re: Carb for H, Sh,W4 brainerd dave 17:09:03 08/20/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]