Re: oil pan drain on H

Posted by El Toro on August 27, 2005 at 05:35:02 from (205.188.117.73):

In Reply to: oil pan drain on H posted by KRUSS on August 26, 2005 at 20:35:27:

Are you sure you're turning the drain plug in the right direction? You need to turn that plug counter-clockwise and I would use a wrench or socket so you don't round off the plug. I would apply some heat, but with oil in the pan it may not get hot enough. It would be hard to hold the pan once it has been removed from the block.

If a socket will fit the plug, I would use a six point socket and use a long breakdown bar. 3/4
drive if you have one. Even a 3/4 air impact may loosen it. Hal

Follow Ups:

• Re: oil pan drain on H RustyFarmall 06:22:39 08/27/05 (8)
  • Re: oil pan drain on H El Toro 07:27:04 08/27/05 (0)
  • Re: oil pan drain on H El Toro 06:56:13 08/27/05 (0)
  • Re: oil pan drain on H El Toro 06:49:37 08/27/05 (0)
  • Re: oil pan drain on H Allan in NE 06:32:49 08/27/05 (4)
    • Re: oil pan drain on H KRUSS 07:06:31 08/27/05 (3)
      • Re: oil pan drain on H Ron Sorden 07:15:08 08/27/05 (2)
        • Re: oil pan drain on H janicholson 08:44:27 08/27/05 (1)
          • Re: oil pan drain on H Jonthan Brown 07:34:59 08/29/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]