Super-c valve problem

Posted by TxFarmall on August 28, 2005 at 13:27:24 from (71.97.96.73):

I have a problem I hope someone canhelp with.

I got a rebuild kit, and service manuals from here on the site.

I took the head down to a machine shop, the guy there said that exhaust valve springs were different than intake on the head, and the kit didn't match.

He also said the head had rotators on the exhaust valves and he thought the new springs would bind with the rotator caps on them.

I also can't seem to find the spring test specs, or rather my manual has three different ones for the 123 engine, and they vary a lot.

Is there anyone out there who has had this problem before?

I'm tempted to just use the old exhaust springs and rotators and hope for the best.

Follow Ups:

• Re: Super-c valve problem El Toro 18:32:18 08/28/05 (0)
• Re: Super-c valve problem janicholson 15:51:20 08/28/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]