Re: Carb Removal

Posted by brainerd dave on September 08, 2005 at 17:46:36 from (148.78.247.10):

In Reply to: Re: Carb Removal posted by Elkfarmer on September 08, 2005 at 17:39:57:

Yep, remove the two screws. That's all that is holding the throttle shaft to the carb. If you are going to remove the carb, disconnect the fuel line (shut the fuel off first), disconnect the air intake hose and choke rod. Remove the two nuts holding the carb to the manifold - sometimes the studs screw out instead of the nuts - that's OK, drop the carb and the shaft end should slide right out.

Follow Ups:

• Re: Carb Removal Elk Farmer 17:53:42 09/08/05 (2)
  • Re: Carb Removal brainerd dave 17:58:58 09/08/05 (1)
    • Re: Carb Removal Elk Farmer 12:43:38 09/09/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]