Re: 560 wheel weights

Posted by Randy in NE on September 09, 2005 at 04:29:46 from (204.124.192.91):

In Reply to: 560 wheel weights posted by Mark f on September 08, 2005 at 18:42:20:

It depends on whether you plan on taking the weights on and off. If you are going to put them on permanently then you can use some readi-rod cut to length. The parts manual shows either 3/4" or 5/8" depending on which one of the three types of split weights you have. It doesn't give the length. The ones for my C are square headed 3/4" x 3 3/4". You use one set of bolts to bolt the first weight on and then bolt the second one to the first weight. If you are going for the original look then there would be 4 bolts for each weight. If you don't plan on taking the weights off just bolt both weights on together using longer bolts.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]