F-20 valve train assy. problem

Posted by Red Mark on September 11, 2005 at 20:38:48 from (66.103.235.168):

Upon recently reassembling the valve train on my F-20, I have found that the valve cover doesn't seal at the valve cover gasket. The gasket = 0.125" thick and the gap with the cover fully seated minus gasket is 0.15". I suspect I have the wrong stack-up of fasteners from the oil trough up. From the oil trough up I have the spacer, flat washer,lockwasher,nut,then valve cover in that order. Is that correct? Or maybe the gasket is too thin? Thanks for any help

Follow Ups:

• Re: F-20 valve train assy. problem Nebraska Cowman 03:23:47 09/12/05 (1)
  • Re: F-20 valve train assy. problem Red Mark 15:37:20 09/12/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]