Re: 3 pt on IH 444 doesn't work

Posted by Mark Scholten on September 13, 2005 at 19:00:00 from (172.199.29.138):

In Reply to: Re: 3 pt on IH 444 doesn't work posted by JB2 on September 13, 2005 at 18:04:10:

I talked to the owner of the tractor tonight to get some info and history. It appears that he was plowing and the plow jumped up and the 3 point stuck in the raised position. A friend of his took the top casting into the dealer and he replaced some parts but it still doesn't work. There is good pressure and flow but the oil is lost at that point. I am going to pull the on/off control body off and look for a blown "O" ring. He told me to keep it at $400.00. That's where I will stop.
Mark

Follow Ups:

• Re: 3 pt on IH 444 doesn't work JB2 13:41:20 09/14/05 (4)
  • Re: 3 pt on IH 444 doesn't work Mark Scholten 14:23:29 09/14/05 (3)
    • Re: 3 pt on IH 444 doesn't work Mark Scholten 15:23:13 09/14/05 (2)
      • Re: 3 pt on IH 444 doesn't work Jb2 16:59:14 09/14/05 (1)
        • Re: 3 pt on IH 444 doesn't work Mark Scholten 18:48:10 09/14/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]