Re: Hydraulic system still not working

Posted by Janicholson on September 19, 2005 at 13:11:39 from (199.17.6.175):

In Reply to: Hydraulic system still not working posted by Mel in OR on September 18, 2005 at 18:48:53:

Pull the connection plate off of the bottom and put(must be a shove in fit) some clear acrylic hose in the two holes. Run the pressure side into a clean bucket with about a gallon of oil in it. Fill the suction side with oil (lift it and pour it full) Put your thumb over the end and submerge it in the bucket. Start the tractor at idle and see if the pump flows correctly. If not there could be drive issues inside the pump that hand rotation does not show. Clearance checks on the pump should also be made if is is not pumping.
Good luck. JimN

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]