Re: Touch Control Super C help

Posted by farmallhal on September 20, 2005 at 17:27:17 from (64.24.35.16):

In Reply to: Re: Touch Control Super C help posted by MM_TX on September 20, 2005 at 16:38:14:

You might have the Blue Ribbon Service handbook, GSS-1024. It is dedicated solely to the Touch Control unit. If you do, on page 16 about 3" down a paragraph states to "never install control valves (48) from the cylinder head end of the block. Alwasys install the cylinder head before installing the control valves".
From this statement it appears they are installed from the rockshaft or front of the unit.
The exploded views in the handbook really doesn't show the o-rings or quantity needed. You will probably determine this on disassembly. I have never had a touch control unit apart myself.
Good luck and hopes this helps. Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]