Re: 407dt cam

Posted by Aces on September 27, 2005 at 15:35:10 from (65.54.155.11):

In Reply to: 407dt cam posted by w.burrow on September 27, 2005 at 10:04:38:

W.burrow I don't see how you can get the back one out, you have to drive the old ones out then line drive the new ones in. You do have to line drive the new bushings so they are straight. With the engine out off and the back plate off you can drive the back bushing out the back install new then put new soft plug behind back bushing to hold the oilleak. If you get the old bushing out you could drive new one to far and soft plug could leak. The other thing how would you make sure the new bushings are turned right for oil to get where it should.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]