Re: c113 engine boring

Posted by Charles McNelly III on October 01, 2005 at 18:34:45 from (65.150.21.104):

In Reply to: c113 engine boring posted by Charles McNelly III on October 01, 2005 at 12:21:12:

I know all about the 3.125" piston and sleeve assembly. I was wanting to go to 3.250" or larger. I was wondering about the block being able to support the larger sleeves if I were to have the block cut out. There is a AC "C" that is putting the hurt on the Farmall boys down here in the 2600 lb. and 3100 lb. division 1 farm stock class. I figure with the larger ci. you could lower the rpm's and lug the engine a little more without it stumbling. With the current setup, you just run out of power. Thanks for all the replys.

Follow Ups:

• Re: c113 (or late C-123)engine boring Stan(VA). 18:22:13 10/02/05 (2)
  • Re: c113 (or late C-123)engine boring Charles McNelly III 18:40:02 10/02/05 (1)
    • Re: c113 (or late C-123)engine boring Stan(VA). 05:03:16 10/03/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]