Re: Best way to get baked on junk off carb body??

Posted by El Toro on October 06, 2005 at 14:10:46 from (152.163.101.13):

In Reply to: Best way to get baked on junk off carb body?? posted by scott#2 on October 06, 2005 at 12:32:37:

I would look for a repair shop that has carburetor
cleaner or something similar and see if they will
soak your carburetor. Kleen Tec carburetor cleaner is very expensive, but if you could find
a shop that uses it, it would clean all that crud very well.

We used a pail of cleaner that had a nylon or plastic basket that you could lower your carburetor into the cleaner and easily removed it too. It was so potent it ate through the metal bucket after a few years. We just kept adding when it got low. Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]