Re: F-12 steering

Posted by Fawteen on October 17, 2005 at 15:51:48 from (65.99.190.231):

In Reply to: Re: F-12 steering posted by chadd on October 17, 2005 at 11:59:21:

I pulled the gear off my F14 so I could drop the shaft and replace the bushings.

I used a gear puller. I used heat. I used ice. I used a BFH. I used a LOT of language that I did not learn in Sunday School. I used multiple repetitions of all of the above.

It took over a week to get it off. As I headed out for work in the morning, I'd give it a couple of whacks with a ballpeen hammer, and take as much of a turn as I could get on the gear puller. When I got home in the evening, I'd do it again.

One morning, as I was leaving for work, I gave it my usual whack, and that sucker popped off, the puller went all the way up and hit the roof of the garage, and the gear went bouncing all over the place.

To this day, I can't figure out why my usual luck didn't hold, and one or both didn't go through the windshield of my truck...

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]