Re: IH B250 transmission clattering

Posted by Harri on October 27, 2005 at 05:38:31 from (83.102.39.95):

In Reply to: Re: IH B250 transmission clattering posted by Michael Soldan on October 27, 2005 at 05:18:28:

Hi Mike, Thanks for your hints too.

I already take off bolts for the torque tube rear end because i wanted to test that fault is not anywhere in the clutch. Now when i took of rear end bolts, i can separately rotate transmission and torque tube, no clattering sound occurs when rotating torque tube but when rotating transmission main shaft, clattering occurs again, and there is one "tight" place when one full rotation made ( when main biggest gear is rotated 360 degrees)

But youre right that throw out bearing looks like it is burned so maybe i have to change that also. Yoke looks fine, do i have to split the tractor before i can change the throw out bearing?

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]