Farmall & IHC Tractors Discussion Board |
Messed Up W-6.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by W-6 Woe,s, on November 25, 2005 at 06:17:13 from (24.225.7.219):
this w-6 I have has alot of little thing,s that arte on it, sombody welded little angles tab,s on the front axle to heep it from moving to much up and down,then they cut a hole out of the hood for an alternator,but it too far out. put car type mud tires on front,it has M type front wheel,s instead of W-6 type,It has full hydralic,s on it but somebody welded two pipes onto the hydro tank on the left side,for i guess better access to fill it look,s like crap, to top this off,a person put power steering on it and all the hoses droop froom left side of engine,and made a bracket for the P/S pump,and put it in front of governer on left side,and then welded tab,s onto the right tie rod wit the hydro cylinder connected to that then running back along the right side of tractor,also with tab,s on the radius rod,s underneath, Totally Grosse!
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|