IH 354 hydraulics help, please

Posted by genep on November 28, 2005 at 10:29:37 from (166.102.51.76):

The lift on my 354 leaks down badly. With a medium duty box blade on it it will "hic-up" every second or two. With the engine off it will drop to the ground in a about a minute. I disassembled the hydraulics this week-end expecting to find something evident because it drops so fast. With the help of a IH Blue Ribbon publication I identified the valves/seals that lock the pressure when holding the lift up. None of the seals, balls, etc show any nicks, cuts, or breaks that I would expect to see from such a rapid leakdown. Can anyone give me some ideas on where to look for my problem? My email is open and any suggestions are welcome and much appreciated.
thanks,
Gene

Replies:

• Re: IH 354 hydraulics help, please Bruce Nuesse 15:26:45 10/12/06 (0)
• Re: IH 354 hydraulics help, please David O'Lone 05:52:14 02/19/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]