Re: Magnum project- pictures

Posted by JakeF on December 30, 2005 at 09:44:51 from (64.146.188.222):

In Reply to: Re: Magnum project- pictures posted by P Backus on December 30, 2005 at 07:30:59:

If the seal you got doesn't have the wear ring you got the old style seal. I wouldn't use it. If you have a wear ring on the crank you need the updated seal, that comes with the wear ring. The installer will install the wear ring and seal at the same time. You can probably reuse the wear ring with a new seal if it's in good shape. If you don't have a wear ring get the installer and update to it, as it's a better seal.

The dowels need to be rounded/pointed and have the 3/4 slit you mentioned. When the dowels fit propperly they will come out pretty hard after you tap them in with a mallet. The book says to secure the two together with a heavy rubber band, but I use a zip tie on each set.

Replies:

• Re: Magnum project- pictures P Backus 16:25:35 12/30/05 (3)
  • Re: Magnum project- pictures JakeF 19:44:26 12/30/05 (2)
    • Re: Magnum project- pictures P Backus 22:23:03 12/30/05 (1)
      • Re: Magnum project- pictures JakeF 13:59:55 12/31/05 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]