Re: will 350 3-valve fit a 350 utility?

Posted by Hugh MacKay on January 03, 2006 at 09:01:51 from (64.228.11.54):

In Reply to: will 350 3-valve fit a 350 utility? posted by robert mangus on January 03, 2006 at 06:22:40:

Robert: If you split those valves down to individual valves they are exactly same on Farmall as on the Utility. You'll notice bolts go through valves holding them in a bank. You can add or delete by just using longer or shorter bolts. The length is different by width of valve body for each. The hand control levers will be different as will the plumbing. The hand control levers are one direct lever to shaft of valve for the Utility, whereas the Farmall has levers to right side of dash with a linkage going to the valve shaft.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]