706 gasser rebuild

Posted by nickWI on January 03, 2006 at 17:38:09 from (209.242.233.163):

Well I'm sorta new to engine rebuilding. My dad & are doing a 706 gas with a 236 motor. I have pulled the the pistons out and ready for the sleeves. Will I be albe to get the sleeves out by hand, or do I need a puller? the head has 2 burnt valves and 2 pistons had the top rings cracked. CAn a machine shop rebuild the head, valves, etc completly, or should I tackle that? i'm taking my time and writing things down. just curious if anyone had any advice. I have been looking through the archives and found good info. 1 more thing I think i'd like to stay all stock, or do you recommend thinner sleeves, I 'd rather not take the block in to get bored. Nick

Replies:

• Re: 706 gasser rebuild the tractor vet 20:03:02 01/03/06 (1)
  • Re: 706 gasser rebuild Ross 19:20:58 01/04/06 (0)
• Re: 706 gasser rebuild ejr-IA. 18:17:00 01/03/06 (0)
• Re: 706 gasser rebuild Greasey Hand 18:10:02 01/03/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]