Re: 706 gasser rebuild

Posted by Greasey Hand on January 03, 2006 at 18:10:02 from (209.131.238.139):

In Reply to: 706 gasser rebuild posted by nickWI on January 03, 2006 at 17:38:09:

Bring the head in to a machine shop, You might need some seats replaced, at least ground, you need a valve grinder & seat grinder fo this work.
Are there grouves in the cyl walls? If there is they will need to be replaced. What are you going to do about the crank bearings? The sleaves are dry i think they should be pressed in, Best done by a shop if you never done it befor.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]