Re: m timing

Posted by MagMan on January 07, 2006 at 18:45:43 from (64.12.116.136):

In Reply to: m timing posted by in oz on January 07, 2006 at 18:36:19:

This is what I do make sure #1 TDC compression put your timing marks on the first notch on the pulley go a little bit farther then trip the mag just past # 1 on the rotor make sure its # 1 compared to the dist cap. install mag.When you install the mag turn it as far toward the motor as you can. Then turn the motor over backwards about 1/2 motor revolution . Then turn it back with crank or something simelar untill you get the first timing mark on the pulley lined up . Then slightly turn the mag away from the motor untill it trips and tighten it up.
JON

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]