Re: She is NOT getting the better of me today.

Posted by the tractor vet on January 16, 2006 at 15:47:54 from (4.124.76.207):

In Reply to: Re: She is NOT getting the better of me today. posted by Mydeere on January 16, 2006 at 15:39:28:

You are 100% correct , when they were done at the factory they did not hold real close on the tolarances and got a littel big on the block bore on some of the holes SOOooooo they made the sleeves for the C and D holes a bit bigger on the outside . So it is like this the best thing to do when doing a rebuild on a gasser or even the older diesels from the late fiftys to mid 60's pull the head and see what you are working with if they are all A and B's then you are good to get parts from where ever or spend the bigger bucks and see if Case I H still offers the ones for the C and D holes as for me i don't screw around i just make it a 291 and be done with it .

Replies:

• Re: She is NOT getting the better of me today. Mydeere 17:21:05 01/16/06 (1)
  • Re: She is NOT getting the better of me today. the tractor vet 19:36:58 01/16/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]