Re: Rusted rims

Posted by CNKS on January 23, 2006 at 17:16:07 from (204.249.178.138):

In Reply to: Rusted rims posted by scott#2 on January 23, 2006 at 15:42:14:

If they are not rusted more than about half way through, they should be ok. Any holes or potential holes, repair or replace. The rust in those pits is best removed with sand blasting. I use MP 170 epoxy primer on mine and paint with GM rally wheel paint (PPG 8568)that I use on the outside. If you don't want to sandblast, and can't otherwise remove all the rust, remove all you can and use a rust preventative or converter to neutralize it. But, from your description they may need to be replaced -- you have a lot of money in that tractor, what's a little more??

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]