Re: Pertronix electronic ignition problems 6v

Posted by JaredFarmallH on March 08, 2006 at 20:30:07 from (66.163.158.179):

In Reply to: Pertronix electronic ignition problems 6v posted by JaredFarmallH on March 08, 2006 at 12:39:55:

Did get it going after I followed a wiring diagram for the tractor.
Turns out that the previous owner had the battery cables connected
backwards. The + was going to the starter and the - was going to
ground. I got it running now and everything seems to work except
for the generator. After I rewired the generator to the specs of the
diagram it does not charge at all. I took the cover off the voltage
regulator and found the points were never going together. Is this
why it is not charging? I have verified that the generator is putting
out voltage, but its not getting through the voltage regulator. I
think I may have a bad unit. Thanks

Replies:

• Re: Pertronix electronic ignition problems 6v Kent Morris 04:30:34 03/09/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]