Re: H fan belt

Posted by Haas on March 10, 2006 at 19:24:51 from (12.65.60.220):

In Reply to: H fan belt posted by Guyzoo on March 10, 2006 at 07:52:19:

That thing with the springs in front of the fan is what drives the water pump. The water pump shaft comes out through the front of the fan and is not attached otherwise to the belt pulley. The fan runs on ball bearings that ride on an extension of the water pump body. The pump shaft comes out through that extension and is driven by the "thing with springs". It's called a full floating shaft drive, meaning there is no load on the pump shaft except torque. The pump body carries the load of the belt. Hope this is not too confusing.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]