SA axles tranny

Posted by banjo on March 15, 2006 at 21:33:47 from (65.67.203.171):

I have the final drives off and i need to remove the axles. If i remove the set screw will the slide out? Ran out of steam and quit for the night.

Any recommendations for the bearings, seals? i know the outer left axle bearing is bad and need to check the final drive also. I'm not having any luck locating them online. Parts house here is a nightmare to get parts.

Now for the tranny, i have the diff out and need to pull the shafts. The rivet is already out of the reverse gear. Manual says to buck reverse gear and drive shaft out. What do they usually use to buck the gear with? I dont want to break anything or mess the bearing up.

I still have to pull the tranny and remove the flange and bearing retainer.

Thanks

Replies:

• Re: SA axles tranny VAJerry 11:26:16 03/16/06 (1)
  • Re: SA axles tranny banjo 20:08:12 03/16/06 (0)
• Re: SA axles tranny kevinez 04:09:17 03/16/06 (1)
  • Re: SA axles tranny banjo 09:17:27 03/16/06 (0)
• Re: SA axles tranny tn terry t 03:16:36 03/16/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]