Re: Setting Valves

Posted by the tractor vet on March 23, 2006 at 07:24:21 from (64.179.117.13):

In Reply to: Re: Setting Valves posted by the tractor vet on March 23, 2006 at 07:12:22:

Oh yea tappet gap is for the intake valve .010 and for the exhaust is .012 and like i said there is no margen for erro you screw up and on these engines it means a valve will get real friendly with a piston , SO if you are not sure of what you are doing then leave it to someone that knowes . and like the one guy sayen that just set one as one is going down well i am going to tell ya he may think that his engine is running good but if it is done the wright way he will get a couple more ponys out of it sure glad he was not the one doing valves when we were racing .

Replies:

• Re: Setting Valves Ron in Nebr 21:15:07 03/23/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]