Farmall & IHC Tractors Discussion Board |
Re: SUPER A1
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Hugh MacKay on March 25, 2006 at 02:59:08 from (216.208.58.183):
In Reply to: Re: SUPER A1 posted by CNKS on March 24, 2006 at 20:17:05:
CNKS: I can very much understand you dad's situation, those old letter series mounted implements were a pain in the butt. However I think IH was following customer demand when they introduced the Super C fast hitch close to 3 years ahead of the other models. Those were the customers looking for mounted equipment in volume, and that Super C was exactly what IH needed in a utility version to compete with Fergie and Ford. I know in our area all row crop work at that time was being done by Cubs, A, SA, C or SC. I know on our own farm we never had any mounted equipment for our H or 300. I did buy a 3 point kit for 560 but only to use a 3 point sprayer and corn planter. Now, ours was a dairy farm, but my dad always grew a few vegetable crops and use Cub and later 130 for that work. Even after the 300 and 400 came out, fast hitch never did catch on in our area for any of the 2 point large fork tractors. Those guys were using trailer plows, disks, cultivators, etc. and never did change their equipment until the early 1960s. By then fast hitch was passe. IH did sell large numbers of Super C, 200 and 230 with fast hitch mowers, plows, planters, row crop cultivators, platform carriers. Most livestock farmers mowed with SA or SC and their descendants until mower conditioners hit the market. Row crop cultivators almost disappeared with the introduction of chemicals. My guess is on the modern day Cat II or larger with 3 point hitch. That hitch probably represents 10% of the cost of the tractor, and other than semi-mounted plows how often are the hitches even used. With no till, very little.
Replies:
Home
| Forums
Today's Featured Article -
Product Review: Kreem Brand Fuel Tank Liner - by Staff. This condition has occurred on a few machines that we have had and fortunately we were able to borrow the technique used at the local motorcycle shop. The product that we have used is called Kreem thouh there are others on the market, this one was recommended and available. This particular product is sold in three parts, a bottle of etch, dryer, and sealer. We were fortunate enough to start the process with stern warnings from those that had used this type of product before. The horror
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|