Farmall & IHC Tractors Discussion Board |
sm
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by scotc on March 29, 2006 at 15:54:03 from (12.171.163.27):
i can"t get my super m to start. It ran fine when I parked it but now it cranks without firing. I"ve got spark from a plug wire to the oil filter housing and new plugs. It"s flooding right out, after about 5 cranks i"ve got gas dripping from the bottom of the carb with no choke or throttle. I"m thinking of switching to electronic ignition but not sure that it would help. I haven"t played with the 400 but it seems to be doing the same thing. I have a feeling that if i put a chain on them and pulled they"d be running in about 5 feet. It also looks like I won"t be getting the sm to the rpru either, my freind"s already chickened out and it"s not looking like my finances will allow renting a truck and trailer.
Replies:
- Re: sm scotc 15:18:30 03/30/06
(0)
- Re: sm old 17:29:28 03/29/06
(0)
- Re: sm Bud W 17:07:38 03/29/06
(0)
- Re: sm Wayne Swenson 16:40:44 03/29/06
(1)
- Re: sm MJF 17:50:20 03/29/06
(0)
Home
| Forums
Today's Featured Article -
Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|