Re: Cub Hydraulics

Posted by Phlogiston on April 12, 2006 at 19:48:02 from (69.137.17.172):

In Reply to: Cub Hydraulics posted by Farmall Ed on April 12, 2006 at 18:58:13:

Hy-Tran Ultra is what needs to be in the unit. If it hunts it may need to be rebuilt. Drain the old fluid out and then refill to the bottom of the fill plug. If that does not work, make sure you take the number off the side of the unit when you go to your Case/IH dealer since there is more than one kit. Directions come with the kit. Be careful removing the screen. Keep everything as clean as you can. Dip all O-rings in Hy-Tran before installation. You can do it.

Phlogiston.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]