Re: IH 674 hydraulic problem

Posted by Prairie Gold Nut on April 19, 2006 at 05:20:14 from (207.69.140.36):

In Reply to: IH 674 hydraulic problem posted by john bick on April 18, 2006 at 18:46:08:

HEY JOHN, DON'T TEAR THAT TRACTOR APART YET!!!
At least try this little trick first. Start the tractor and let run at a fast idle with the hydraulic control in the raise position. Now use air presure from a blow gun to blow air into the dip stick tube on the left side of the transmission housing. Your pump is having trouble self priming and this will give it a boost. You will hear air coming out from under the seat because there is a breather there, so you cannot put too much air to hurt anything.
This is a common problem with model tractor.
This has always worked for me. Hope it helps you.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]