Farmall & IHC Tractors Discussion Board |
IH 674 hydraulic problem
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by john bick on April 18, 2006 at 18:46:08 from (12.162.61.81):
Hey folks I am posting for a friend of mine with a 674 IH. All hydraulics were working fine till he changed the hydraulic filter....now absolutely no hydraulics work on the tractor. What could be the problem, air in the system? If so,how should we go about bleeding it. We have tried bleeding the lines. WE have tried working the lift arm control levers up and down slowly with a steady RPM on the advice of a local mechanic. The loader is down of course, but we have moved the tractor back and forth several feet, so the clutch is working properly, but the PTO shaft will not turn. I hope you guys can help us out on this one. THanks for any replies. John
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|