Re: Question about adding hydraulic pump to M?

Posted by Steven@AZ on May 22, 2006 at 02:56:00 from (24.121.48.188):

In Reply to: Question about adding hydraulic pump to M? posted by unioncreek on May 21, 2006 at 19:18:05:

Do you have a local hydraulic supply company? If you do, check with them about a pump that can handle the side-load of belt tension.

If not, you can go to this web store and choose to enter the parts room and look under Cross manufacturing for a pump like mine. Mine is the 15 gallon per minute pump and it handles the power steering and any implement nicely.

You will want at least a "B" section belt and the largest pulleys you can fit in order to transfer enough power. I get about 1000 psi out of mine before the belt slips. For comparison, the belly pumps put out around 8 GPM at 800 psi, the Super M live pumps will do 12 GPM at 1200 psi.

I had a good machine shop to work with to make the custom pulleys out of solid steel, along with a mounting plate for the pump, etc. It will be easy to add the pump to an M, mount on the carburetor side of the engine - and you have a lot more room between the crankshaft and front bolster casting compared to an H. I have to take out all the bolts and move the bolster forward to change drive belts now.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]