Re: Rear Rim Question

Posted by CNKS on May 27, 2006 at 13:59:14 from (204.249.178.138):

In Reply to: Re: Rear Rim Question posted by Retcol on May 27, 2006 at 11:41:12:

The width is the measurement from one inside lip to the other, in other words the distance between the vertical surfaces that the bead fits against, not the width edge to edge. Perhaps if you had two people to hold two rulers absolutely straight up and down on the outside while you measure between them, then subtract maybe a quarter inch, or whatever the twice the rim thickness is.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]