Re: 1066 PTO Pressure Check/Adjustment

Posted by the tractor vet on June 15, 2006 at 07:07:41 from (66.202.111.14):

In Reply to: 1066 PTO Pressure Check/Adjustment posted by Michael Sheik on June 15, 2006 at 06:46:17:

YEp , it sure does . In one of the I T manuals it gives ya the part # of that fitting and the only place to get it is from Case I H providing that they will sell it to you . Now if ya have the part # and ya have one real dumb parts guy tell him to order it and don't tell him what it is . Or if your real good at fabben things you can order the OEM plug drill a hole in it and weld a fitting on to it for a grease gun hose and add a fitting to the other end and get a GOOD 600 LBs pressure gauge and your good to go . Now when setting the pressure you MUST HAVE THE HDY.OIL TO OPERATING TEMP 150-180 degrees then set the lock up pressure . I set 1066- 1466 to around 265-285 , that way even if yours is tweaked you won't slip it . I made one up that way along time ago but i realy never trusted it as when playen with hdy. pressure one must be vary careful. And make sure that the half nut is in place to lock it to the square nut .

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]